AVK 816 Series Maintenance And Instruction Manual Download Page 8

page 7

PARTS AND SERVICE

For information on parts and service for your area contact AVK.  Make a note of the valve model number and size located on 

the valve and contact:

AVK Company

2155 N. Meridian Blvd

Minden, NV 89423

PH: 775-552-1400

FAX: 775-783-7502

www.americanavk.com

 

AVK COMPANY WARRANTY

SERIES 816 BUTTERFLY VALVES

 

AVK Company warrants its Series 816 Butterfly Valves to be free from defects in workmanship and materials for a 

period of one (1) year from the date of shipment from AVK Company except as noted.  AVK Company shall have no obligation 

under this warranty unless it is notified of claims hereunder promptly and in writing upon discovery thereof and within the 

warranty period, and unless the product is delivered to AVK Company within thirty (30) days of such notice.

 

AVK shall have the right to inspect said product before it is removed from installation. If the product is removed from 

installation prior to approval from AVK this warranty shall be void.

 

As to motors, gearing or accessory equipment purchased by AVK Company from other manufacturers, and used or 

incorporated into AVK Company’s products, those manufacturers’ warranties shall apply.

 

AVK Company's sole responsibility shall be, in its sole discretion, to replace the product with the same or a similar 

product, repair the product, or refund the price paid for the product provided the product has been properly applied and used 

under normal service and under conditions for which it is designed. AVK Company shall not be liable for indirect, special, 

incidental, or consequential damage or penalties and does not assume any liability of purchase to others or to anyone for 

injury to persons or property.

THIS IS THE EXCLUSIVE WARRANTY GIVEN IN CONNECTION WITH THE SALE OF THIS PRODUCT.  THERE ARE 

NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING EXPRESSED OR IMPLIED WARRANTY OF 

MERCHANTABILITY, OR ANY EXPRESSED OR IMPLIED WARRANTY OF SUITABILITY FOR ANY PARTICULAR 

PURPOSE, GIVEN BY AVK COMPANY IN CONNECTION WITH THIS PRODUCT.

Summary of Contents for 816 Series









Reviews: