
Factory defaulting the system
Should a need arise to remove ALL system configuration
settings, press and hold the following buttons at the same
time for 5 seconds:
BACK + MAKE CALL + MUTE + DISCONNECT
The source selection LEDs will light up one by one and
blink three times before the entire system reboots�
Once the system has fully booted up, it is ready for setup
and configuration�
!
For a wired network connection only: Do not
forget you must manually register the Cisco codec
to the CUCM and ensure that the SERIAL PORT
setting is set to OFF�
The Wi-Fi configurations can be reset by pressing the fol-
lowing for about three seconds:
BACK + MIC MUTE
To power-cycle the
cart, use the end of a
paperclip or something
similar, and insert into
the Pinhole on the side
of the Console�
WARNING:
Ensure that any connected devices requiring
power is turned off before power-cycling the system� All
connected devices requiring power will lose power when
the system is power-cycled�
© 2017 Avizia Inc. All rights reserved. | avizia.com | 270593.D AVZ-CA750-DOC-UIG-04
CA750 | Installation & User Guide
Factory defaulting the system
40
| Maintaining the system