AVIVA ACCU-CHEK Owner'S Booklet Download Page 70 | Manualshive

Page: 70 / 80

background image

Chapter 6: Technical Information

68

ACCU-CHEK Aviva Limited 3-Year Warranty

Roche Diagnostics warrants to the original purchaser of the meter that your ACCU-CHEK Aviva meter will be free from
defects in materials and workmanship for 3 years from the date of purchase. If, during this 3-year period, the meter
does not work properly because of a defect in materials or workmanship, Roche Diagnostics will replace it with a new
ACCU-CHEK Aviva meter or equivalent product free of charge. The warranty on the replacement meter will expire on
the date of the original warranty expiration or 90 days after the shipment of a replacement system, whichever period
is longer. The purchaser’s exclusive remedy with respect to the ACCU-CHEK Aviva meter shall be replacement.

Money-back offer conditions and exceptions: This money-back offer is void for persons enrolled in, or for
any prescriptions reimbursed by, a third-party payer including public (e.g. Medicare/Medicaid) and private
payers. Consumers affected by this exclusion may instead request a different ACCU-CHEK meter/system.

This warranty does not apply to the performance of an ACCU-CHEK Aviva meter that has been damaged by
accident or has been altered, misused, tampered with, or abused in any way. Roche Diagnostics will handle
meters that show damage or abuse according to its Non-Warranty Service Policy described below.

THE ABOVE WARRANTY IS EXCLUSIVE OF ALL OTHER WARRANTIES, AND ROCHE DIAGNOSTICS MAKES NO
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ROCHE DIAGNOSTICS
BE LIABLE TO THE PURCHASER OR ANY OTHER PERSON FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT,
SPECIAL, OR PUNITIVE DAMAGES ARISING FROM OR IN ANY WAY CONNECTED WITH THE PURCHASE OR
OPERATION OF THE METER OR ITS PARTS. NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, IF ANY IS IMPLIED FROM THE SALE OF THE METER, SHALL EXTEND FOR A LONGER
DURATION THAN THREE YEARS FROM THE DATE OF PURCHASE.

«
...
68
69
70
71
72
...
»

Summary of Contents for ACCU-CHEK

















































































Reviews:

No comments

Related manuals for ACCU-CHEK

Brand: Accu-Chek Pages: 2

Brand: MiaoMiao Pages: 20

Brand: Lifescan Pages: 2

Brand: Accu-Chek Pages: 2

Brand: Icare Pages: 14

Brand: Rapid Diagnostic Pages: 2

Brand: Easy Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands