29
Appendix D Resetting to the Factory-Default State
To reset your Sequoia to its factory-default state, perform the following steps:
Step 1. Power-off the Sequoia by pressing the power switch.
Step 2. Push number
2
(middle) dip switch located on Sequoia’s rear panel downwards to the
ON
position.
Figure D-1
Push down the Number
2
(Middle) Dip Switch
Step 3. Power-on the Sequoia by pressing the power switch.
Step 4. Push back the number
2
(middle) dip switch upwards to the default position.
Upon resetting your device to factory-default state, your previously saved preset files will be automatically
removed. Use Phoenix-G software to set the output resolution and create preset file(s) again.
