9
2.1.2 Navigating the Main Menu
1. Press the
button from the default initial screen to enter the main menu.
2. Use the buttons on the front panel to navigate: ( / /
)
3. There are a number of tables below, each detailing an item on the main menu (Input Port,
Output Port… etc.) Within each table is listed the choices that can be made within each item.
Input Port
Autoscan
On
: enables the signal automatic detection feature.
Off
: selects the signal manually.
Source
:
HDMI
DVI
VGA
YPbPr
SDI
Exit
Exits the input signal setup menu.
Table 2-1
Input Port
If selecting the signal manually, make sure to select the correct signal type based on the actual connected
input signal to the Pacific C-A / C-AG to avoid image display problems (e.g., noise, flicker, etc.).
Output Port
SDI Enable
On
: enables SDI out feature (default setting).
Off
: disables SDI out feature.
YPbPr Enable
On
: enables YPbPr out feature.
Off
: disables YPbPr out feature (default setting).
Note: Make sure to select
“Off” when outputting VGA signal on “DVI-I
OUT
” port (through DVI-I to VGA adapter) to avoid a color display
problem.
Standard
SMPTE
: select this for SDI/YPbPr output.
VESA
: select this for HDMI/DVI/VGA output.
Output Timing
For SMPTE standard, select the following output signal.
2048p @ 23.98, 24
(Hz)
1080p @ 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(Hz)
1080i @ 50, 59.94, 60
(Hz)
1080PsF @ 23.98, 24
(Hz)
720p @ 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(Hz)
SD_625
(
576i @ 50
Hz)
SD_525
(
487i @ 59.94
Hz)
For VESA standard, select the following output signal.
1920x1200 @ 50, 60
(Hz)
1920x1080 @ 50, 60
(Hz)
1680x1050 @ 50, 60, 75
(Hz)
1600x1200 @ 50, 60, 75
(Hz)
1440x900 @ 50, 60, 75
(Hz)
1400x1050 @ 50, 60, 75
(Hz)
1360x768 @ 50, 60, 75
(Hz)
1280x1024 @ 50, 60, 75
(Hz)
1280x768 @ 50, 60, 75
(Hz)
1280x720 @ 50, 60, 75
(Hz)
1024x768 @ 50, 60, 75
(Hz)
800x600 @ 50, 60, 75
(Hz)
640x480 @ 60
(Hz)
Note: For models (Pacific C-A) without the genlock feature (no
Ref IN
port); 23.98, 29.97 and 59.94Hz refresh rates are
not
supported.