Avital Bandido 2 Owner'S Manual Download Page 3

Bandido

2

Congratulations! You have just purchased the Bandido

2

, a full-featured vehicle

security system with anti-carjacking manufactured by Avital Technologies, Inc.
To fully benefit from the capabilities of your system, we encourage you to
read the Owner’s Manual thoroughly before using the system. If you have any
problems or questions regarding your system, consult the dealer from whom
you purchased this product. To locate an authorized Avital dealer, contact
Avital Technologies directly at 1-800-253-0334 (toll-free within the U.S. only)
or 1-847-215-2233. In Mexico, dial 525-605-8541.

Lifetime Warranty
Avital guarantees the operation of your Bandido

2

 control unit and remote

controls for as long as you own your car. (Please refer to your Lifetime Limited 
Warranty Card for complete information.) Make sure that you receive your
warranty card from your dealer, complete the required information and mail
the registration portion to Avital Technologies. You should retain the top
portion of the warranty card for your records.

Anti-Carjacking
The Anti-Carjacking feature of the alarm system is designed for personal
protection as well as the recovery of your carjacked vehicle. In the event of a
carjacking attempt, do not resist. If your vehicle is carjacked, the Bandido

2

 will 

automatically activate the siren, flash the lights and immobilize the vehicle's
ignition and starter.
Carefully read the following pages for specific operating instructions.

Remote Controls 
Included with your system are two AviGlo™3-button/6-channel remote
controls. Once exposed to light, the AviGlo remote control buttons will glow,
making the buttons visible in the dark. 
The remote control (remote) is a miniature transmitter powered by a small +12 
volt battery. Obstructions, electrical or radio interference, weather conditions,
window tint or a weak battery can reduce this range. Your remote is the key to 
your system and can be used to arm and disarm your alarm, lock and unlock
your doors, and control optional accessories such as a remote engine starter,
window roll-up and garage door opener.

1

Bandido

Owner's Manual

Summary of Contents for Bandido 2













Reviews: