background image

Remote Engine Start - Operation

Your AviStart system will start your vehicle engine with a touch of a button on 
your AviGlo™ remote control. To also cool or warm the interior of your
vehicle before you enter, set the climate control to your preference (heater,
defrost or air conditioning) 

before remote starting

.  Set the fan to a medium

speed 

(not maximum)

. Ensure the vehicle is in "Park" and the key is 

not

 in the

ignition.

To Remote Start the Engine:

1 . Press the remote control 

s

 button for 1-2 seconds, 10-15 minutes before

you enter the vehicle (this will allow the climate control time to heat or
cool the vehicle.) The parking lights will flash 2 times, the engine will start 
and the parking lights will remain on as a visual indication that the engine
is running. AviStart will automatically lock the doors when the engine is
remote started.  If you have a diesel engine, the AviStart will be
programmed to start 15 seconds after the parking lights flash 2 times or
immediately after the vehicle glow plug light has turned off. This will
allow time for the glow plugs to heat up.

2. If the engine does not remote start, the AviStart system will attempt to start

the engine two additional times.

3 . If the vehicle is left unattended, the engine will run for 20 minutes and

then shut off automatically. You can also program the system to run the
engine  for 30 minutes. (See the "Programming Table for System Features"
on page 11.)

To Operate the Vehicle While Remote Started:

1 . Press the remote control

D

 button for 1-2 seconds. The doors will unlock.

2 . Enter the vehicle (do not touch the brake pedal), turn the ignition key to

the "ON" position and then press the brake pedal. Pressing the brake pedal 
will shut off the remote start and parking lights but the engine will remain
running.

3 . You can now drive the vehicle.

To Shut Off Remote Start:

At any time while the engine is remote started, you can shut the engine off
with the remote control by pressing the remote control 

s

 button for 1-2

seconds. The engine and parking lights will shut off.

7

AviStart 4501 Owner's Manual 0999

Summary of Contents for AVISTART 4501

















Reviews: