To Activate
1 . While the vehicle engine is running with the ignition key turned "ON,"
press the remote control
s
button for 1-2 seconds. The parking lights will
flash 2 times and stay on. (Make sure the vehicle is in "Park" and the
parking brake is set.)
2 . Turn the ignition key "OFF" and the engine will stay running.
3 . Remove the ignition key and remote control and exit the vehicle.
Remember to keep the ignition key and remote control in your
possession.
4 . Press the remote control
C
button for 1-2 seconds to lock the doors and
secure the vehicle.
To Deactivate
1 . Press the remote control
D
button for 1-2 seconds to unlock the doors.
2 . Enter the vehicle (do not touch the brake pedal), turn the ignition key to
the "ON" position and then press the brake pedal. The parking lights will
shut off and you will now be able to drive the vehicle.
Protected Valet Mode
You should place your system in Protected Valet Mode whenever your vehicle
is being serviced by mechanics, car wash personnel or driven by valet parking
attendants. While in the Protected Valet Mode, all remote start functions are
bypassed to prevent unauthorized or accidental operation. If a remote start is
attempted, the parking lights will flash 4 times and the vehicle will not start.
To Turn on Protected Valet Mode
1 . Turn the ignition key to the "ON" position or start the engine.
2 . Flick the valet switch to the "ON" position.
3. Turn the ignition key to the "OFF" position.
To Turn off Protected Valet Mode
1 . Turn the ignition key to the "ON" position or start the engine.
2 . Flick the valet switch to the "OFF" position.
3. Turn the ignition key to the "OFF" position.
7
AviStart 3001 Owner's Manual
Summary of Contents for AVISTART 3001
Page 1: ...FRONT COVER ...
