manualshive.com logo in svg

Avital 5303, Owner'S Manual

The Patek Philippe 5303 is a remarkable timepiece that exudes elegance and luxury. This exquisite manual-winding watch boasts intricate details and a stunning design. For those looking to explore its features and functions, a comprehensive user manual can be downloaded for free from manualshive.com.

Share
Download
background image

3

© 2011 Directed Electronics. All rights reserved.

What you get

•  One 5-button 2-way LCD transmitter
•  One 4-button 1-way transmitter
•  Owner's guide
•  Warranty registration card

Important information

Congratulations  on  the  purchase  of  your  combination  remote  start 
alarm system. Due to the complexity of this system, it must be installed 
by an authorized dealer only. Installation of this product by anyone other 
than an authorized dealer voids the warranty. All dealers are provided 
with a preprinted dealer cer tif  cate to verify authorization.

By carefully reading this Owner’s Guide prior to using your system, you 
will maximize the use of this system and its features. Please visit 

www.avital.com 

for general and additional guide information.

Government Regulations and Safety information

Read the 

Government Regulations

 and 

Warning! Safety 

First

 sections of this manual prior to operating this system.

Warning!

  Failure  to  heed  this  information  can  result  in 

death, personal injury or property damage and may also 
result in the illegal use of the system beyond its intended 
purpose. 

Summary of Contents for 5303





















































Reviews:

No comments

Related manuals for 5303

ELRO FS7810 Instruction Manual preview
FS7810
Brand: ELRO Pages: 2
REV Ritter RWM-20 Instruction Manual preview
RWM-20
Brand: REV Ritter Pages: 10
ZETTLER LOOP 500 Operating Instruction preview
LOOP 500
Brand: ZETTLER Pages: 21
ELOTEC EO 120 Installation And Maintenance Instructions Manual preview
EO 120
Brand: ELOTEC Pages: 12
IKEA E1803 Manual preview
E1803
Brand: IKEA Pages: 124
Muji CUCKOO User Manual preview
CUCKOO
Brand: Muji Pages: 2
Ambient Weather WS-DP02 User Manual preview
WS-DP02
Brand: Ambient Weather Pages: 10
Code Alarm caSEC Installation And Reference Manual preview
caSEC
Brand: Code Alarm Pages: 33
Code Alarm Procomp Installation Manual preview
Procomp
Brand: Code Alarm Pages: 44
HumanTechnik lisa RF time flash Operation Instructions Manual preview
lisa RF time flash
Brand: HumanTechnik Pages: 52
SETRONIC VERONA Boomerang SF 6P150 Manual preview
Boomerang SF 6P150
Brand: SETRONIC VERONA Pages: 4
SETRONIC VERONA Boomerang S 6P150 Manual preview
Boomerang S 6P150
Brand: SETRONIC VERONA Pages: 4
La Crosse Technology WT-9300 Instruction Manual preview
WT-9300
Brand: La Crosse Technology Pages: 5
Shuoyu Technology SYW0258 Manual preview
SYW0258
Brand: Shuoyu Technology Pages: 6
SenTech SK-20NZ Installation Instructions preview
SK-20NZ
Brand: SenTech Pages: 2
Avital 2100 Installation Manual preview
2100
Brand: Avital Pages: 26
Cavius 2203-002 User Manual preview
2203-002
Brand: Cavius Pages: 4
Cavius 3104-001 User Manual preview
3104-001
Brand: Cavius Pages: 15

Brands by name

Popular brands

Load more brands