Avital 4113, Owner'S Manual

Page: 11 / 24

11 © 2009 Directed Electronics. All rights reserved.
➢
Remote Start
This feature allows you to remotely start and run your vehicle for a
programmable period of time. This makes it possible to warm up the
engine, as well as adjust the interior temperature of the vehicle with
the climate control system. If interior heating or cooling is desired, the
climate controls must be preset, and the fan blower must be set to the
desired level prior to remote starting the vehicle.
Important!
(1) Never remotely start the vehicle with the
vehicle in gear, and (2) Never remotely start the vehicle
with the key in the ignition.
To remote start the vehicle:
1. Press and release the single button on the remote control once.
2. The parking lights flash to confirm remote start.
3. Once the vehicle has started, the parking lights come on solid. The
vehicle runs for the pre-programmed period of time (12, 24, or 60
minutes) or until a shutdown input is triggered. This can be set to
minute increments by your installer.
When you are ready to drive the vehicle:
1. Insert the ignition key and turn it to the ON (not the
START) position.
2. Press the brake pedal. The remote start system shuts down but the
motor continues to run because the ignition has been turned on.
The vehicle now operates as usual.
Note:
If the brake pedal is pressed before the key is in the
ON position, the engine will shut down.