Avital 2101L, Owner'S Manual, Page: 9 / 21

8
© 2015 Directed. All rights reserved.
Disabling the system without a transmitter
If your remote transmitter is lost or damaged, you can
manually override the starter kill (if installed). To do
this, you must have the ve hi cle’s ignition key and know
where the Valet
®
switch is located. Be sure to check
with the installer for the location of the Valet
®
switch.
To bypass the starter kill:
1. Turn the ignition on.
2. Press and release the
Valet switch within 10
seconds. The status LED
stops flashing and the vehicle
starts. If the vehicle does not start, you may have waited
too long. Turn the ignition off and repeat the process.
Location of Valet Button_________________________________
Audible mode
To temporarily turn on the lock or unlock horn honk(s),
press
for less than one second before locking or
unlocking. The confirmation honk(s) will be present for
that one op er a tion only.
Valet mode
You can prevent your system from ac ti vat ing the starter
kill (if installed) using Valet
®
Mode. This is very use ful
DRW-35