9
Setting °C/°F and Date/Time
When the thermometer is used for the first time and each time the
batteries are changed, the date and time are displayed in the format
1-1 00:00 during the basic set-up (after the self-test). Set each of the
following settings in turn: unit in which the temperature will be
displayed, date and time. To set the device, proceed in stages:
Unit – year – month – day – hours – minutes
After install batteries (first time use), the device performs a brief
self-test: all elements of the display are shown for approx. 1 second.
Following a successful self-test, the device emits two short beeps. In
Standby mode, the date and time are shown and“--” is displayed.
1. Changing from Fahrenheit to Celsius
(1) Press the "SET" button for 3 seconds to set the °C/°F.
(2) Press the “Memory” button to confirm entry.
2. Date/Time Function
(1) Press the "SET" button to change.
(2) Press the "Memory" button to confirm entry.
(3) The blinking Date, followed by Year, Hour and Minute will display.
Repeat steps (1) and (2) to adjust the date/time setting.
(4) Your unit is now ready to take a reading, or press the “Memory”
button to turn the unit off.
(5) After this process, the thermometer shows the word “OFF” in the
display and switches off automatically.
