8
Setting the Date and Time
It is necessary to set the date and time for the unit every time batteries
are initially installed or replaced.
To set the date and time, proceed as follows:
1. Loading 4 AAA alkaline batteries; the Year value will begin to flash on
the display.
2. Press the MEMORY Recall “M1” button to advance the display to
the desired year, press MEMORY Recall “M2” button to confirm the
year.
3. Next, the month will blink. Repeat steps 2 to set the month and date,
then hours, then minutes.
4. After setting the minutes, the unit will automatically exit out of the
date/time setting mode and briefly show the word OFF before shutting
down.