Page 9 of 11
7 Technical Data
8 Troubleshooting
Model No.
BCW-70A
Volume
70L
Bottles
28 Standard Bottles
Rated Power
220 - 240Va.c.
Rated Frequency
50Hz
Climate Type
T
Input Power
65W
Power Consumption kWh/24h
0.6 (15°C)
Temperature Control Range
12 - 18ºC
Net Weight
19.5Kg
Product Size D x W x H mm
520 x 430 x 740
Symptoms
Possible cause
Solutions
The wine cooler does not
work.
There is a power failure.
A house fuse has blown or circuit
breaker has tripped
Ensure the cooler is plugged in and the
power socket is turned on.
Replace the broken fuse or reset the
circuit breaker in your meter box.
Control panel is locked
Control Panel has Locked
Press the and button
simultaneously for 3 seconds to unlock
the control panel.
Wait for beep sound
Wine cooler is not reaching
the desired temperature
The cooler is placed too close to a heat
source
Not sufficient ventilation
The door is opened too frequently or for
a long period of time
The door is not closed completely.
The door gasket does not seal properly.
The Wine Cooler does not have the
correct clearances.
Keep the cooler away from sunshine or
other heat sources.
Place the wine cooler in good ventilation
and keep any items away from the fans.
Close the door tightly and do not open
the door too frequently or for a long
period of time.
Ensure the Door is Closed properly
Ensure the gasket is fitted properly and
not damaged.
Ensure there is adequate clearance
around the unit. Refer to the installation
instructions.
The light does not work.
Not plugged in.
The circuit breaker tripped or a blown
fuse.
The light button is “OFF”.
Ensure the unit is plugged in and
switched on
Check the fuse and circuit breaker
Press the Light Button
Vibrations
Unit is not level
Ensure that the Wine Cooler is level.
The door will not close
properly.
The Wine Cooler is not level.
The door was not properly installed.
The gasket is dirty.
The shelves are out of position.
Ensure the unit is level
Ensure the door is working properly
Clean the door gasket
Ensure the shelves are installed correctly
