This User Manual Applies to both models of AVIT Gear G3 series
The AVIT Gear Wireless HDMI Set include a Transmitter and Receiver, it
Transmits high definition video and audio to any HDTV display up to
30 meters
The G3-1080 supports resolutions up to 1080p/60 Full HD, 3DTV, CEC, and 7.1-channels
of High Bit Rate (HBR) lossless digital audio such as Dolby True HD, DTS -HD Master
Audio
The G3-UHD supports resolutions up to 2160P/30 (3840 x 2160P) Full HD, 3DTV, CEC, and
7.1-channels
of High Bit Rate (HBR) lossless digital audio such as Dolby True HD, DTS -HD Master
Audio
The G3 series Wireless kits are specifically designed to transmit within a room and not be used
beside another transmitting set
Best Practice For Operation
●
Placement of Transmitter is at source end, and receiver at Display
●
To ensure trouble-free operation, the device may only be used indoors, it is NOT
suitable for outdoor use
●
Always place the transmitter and receiver on a flat surface and ensure that the USB
cables and HDMI are not under voltage or near heat sources
●
The G3 is designed for use in a single room, for the best transmission performance
there should be a clear line of sight between transmitter and receiver (up to 30m) and
you should use a good Quality HDMI cable
●
Transmitter and receiver must not come in contact with liquids. This will void your
warranty
●
If you notice external damage to the equipment or unexpected or unusual operation,
the system should not be used. In these cases, disconnect the devices from power
●
We recommend turn off both devices when not in use, this can be achieved via CEC
presets on a display, or a power multiport device with pre-set command functionality
1
