Avisoft UltraSoundGate Player 116 User Manual Download Page 4

End-user Agreement

This a legal agreement between Avisoft Bioacoustics and
the buyer. By operating this device and the accompanying
software, the buyer accepts the terms of this agreement.

1.The Device and the accompanying software is warranted to 
  perform substantially in accordance with the operating manual 
  fora period of 24 months from the date of shipment.

2.EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY 
  ABOVE, THE DEVICE IS PROVIDED WITH NO OTHER 
  WARRANTIES, EXPRESS OR IMPLIED. THE VENDOR 
  EXCLUDES ALL IMPLIED WARRANTIES, INCLUDING, 
  BUT NOT LIMITED TO, IMPLIED WARRANTIES OF 
  MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
   PURPOSE.

3.The Vendor’s entire liability and the Buyer’s exclusive remedy 
  shall be, at the Vendor’s SOLE DISCRETION, either (1) return 
  of the device and refund of purchase price or (2) repair or 
  replacement of the device.

4. THE VENDOR WILL NOT BE LIABLE FOR ANY SPECIAL, 
  INDIRECT, OR CONSEQUENTIAL DAMAGES HEREUNDER,
  INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS,
  LOSS OF USE, OR LOSS OF DATA OR INFORMATION OF 
  ANY KIND, ARISING OUT OF THE USE OF OR INABILITY 
  TO USE THE DEVICE IN NO EVENT SHALL THE VENDOR
  BE LIABLE FOR ANY AMOUNT IN EXCESS OF THE 
  PURCHASE PRICE.

5. This agreement is the complete and exclusive agreement 
  between the Vendor and the Buyer concerning the device.

Real-time playback visualization

The currently played waveforms can be visualized by selecting the 
option 

Playback

 from the 

Device

 listbox on the Configuration 

dialog box (

Options / Configuration...

) Once this has been done, 

the currently played waveform will be visualized either on the  
spectrogram or waveform display mode. In order to prevent 
creating (triggering) new .wav files, the monitoring pause button 
(

Monitoring / Pause

) should be activated.

Note however that the real-time visualization will increase the CPU 
utilization, which might sometimes cause trouble depending on the 
specific computer performance.

Summary of Contents for UltraSoundGate Player 116

Page 1: ...al connection a Switchcraft 0 01 Micro Plug part number 850X is recommended 6 OVERload indicator The red OVERload LED indicates clipping Clipping occurs when the power supply voltage for the power amplifier section is not high enough to reproduce the input signal at the current playback volume setting without distortion If this happens the playback volume 2 should be reduced or the external power ...

Page 2: ...back and the inability of the RECORDER software to respond to user inputs during the playback Under these circumstances it is therefore recommended to resample the sound files in advance in Avisoft SASLab Pro Lite In the bus powered operation mode the option switch power off when not in use will reduce the current drawn from the USB while no file is being played the power amplifier will be switche...

Page 3: ...ws to play wav files with any sample rate below 500 kHz Output power 1 5 W USB bus powered or 10 W with external 36V power supply DC bias voltage for electrostatic speakers 200 V Frequency range 1 125 kHz Slew rate 8 V µsec Overload indicator red LED yes Volume adjustment potentiometer yes Speaker output connector 4 pole Speakon connector Other inputs external trigger TTL compatible digital output...

Page 4: ...ENDOR WILL NOT BE LIABLE FOR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES HEREUNDER INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS LOSS OF USE OR LOSS OF DATA OR INFORMATION OF ANY KIND ARISING OUT OF THE USE OF OR INABILITY TO USE THE DEVICE IN NO EVENT SHALL THE VENDOR BE LIABLE FOR ANY AMOUNT IN EXCESS OF THE PURCHASE PRICE 5 This agreement is the complete and exclusive agreement between the Ven...

Reviews: