Avision FT-0807H User Manual Download Page 3

Page: 3 / 86

User’s Manual

iii

Federal Communications Commission (FCC) compliance

information statement

Part 15

The product has been tested and found to comply with the

limits for a Class A digital device pursuant to Part 15 of the FCC

Rules. Operation is subject to the following two conditions: (1)

this device may not cause harmful interference and (2) this

device must accept any interference received including

interference that may cause undesired operation.

The FCC Class A limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction

manual may cause harmful interference in which case the user

will be required to correct the interference at his own expense.

CE

Warning

This is a class A product. In a domestic environment this

product may cause radio interference in which case the

user may be required to take adequate measures.

Summary of Contents for FT-0807H























































































Search results

Summary of Contents for FT-0807H

Reviews:

Related manuals for FT-0807H

Brands by name

Popular brands

Avision FT-0807H, User Manual

Search results

Summary of Contents for FT-0807H

Reviews:

Related manuals for FT-0807H

Brands by name

Popular brands