manualshive.com logo in svg

Avision FL-1207H, User Manual

Share
Download
Avision FL-1207H User Manual Download Page 98

 User’s Manual 

5.

 

ISIS Interface Operation 

 

 

* Please refer to the preceding chapter, Scanner Installation, to 

install ISIS scanner driver. You may start the supplied 

QuickScan software application to scan via the ISIS user 

interface. 

 

The ISIS driver operation method is similar to the TWAIN’s. 

Every function on the ISIS interface screen is briefly described 

as below: 

 

 

 

Mode: Select one of scan modes, including B&W, gray, color 

options. 
Dither: 5 halftone levels available, can be disabled. 
Dots per inch: Select your desired resolution. 
Paper Size: Select your desired paper size. 
Brightness: Adjust your scan image brightness or darkness. 
Contrast: Adjust the range between the darkest and the 

lightest shades in the image. 
Default: Click to reset all settings. 
Area: Select your desired scan area or position. 

 

 

5-1 

Summary of Contents for FL-1207H






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands