User’s Manual
2-3
Note: If the scanning unit is not located at the front of the
scanner before transporting the scanner, be sure to do the
follows:
1.
Turn on the scanner. The scanning unit should move to the
front of the scanner.
2.
Press the lock switch down to the “Lock position”.
3.
The scanner is now ready to transport.
2.2
Connecting to Power
Plug the small end of the power adaptor into the power jack of
your scanner. Insert the other end to an appropriate power
outlet.
2.3
Turning on the Power
After the power cable has been connected, press the power
switch button on the panel to turn on the scanner. The LED
indicator will be lit up. To turn off the scanner, press the
power switch button again. The LED indicator will be shut off.
Summary of Contents for BT-1007B
