manualshive.com logo in svg

Avision BS-1005S, User Manual, Page: 60 / 96

Share
Download
Avision BS-1005S User Manual Download Page 60

User’s Manual 

 

 
By Length (Paper/Position: When a multi-feed is 

detected for the first time, the scanner memorizes the length of 
the document, the length and position of the object (photo or 

label) attached to the document. When you perform next 
scanning, this pattern of multi-feed will be bypassed. 

To use the intelligent mode, 
1.

 

Choose your desired multi-feed detecting method to 

bypass by.   

2.

 

When multi-feed occurs during scanning, a multi-feed 

warning message appears. 

3.

 

Choose OK to skip the multi-feed condition from next 

scanning and close the message.   

4.

 

Open your TWAIN data source in your scanning application. 

The same multi-feed condition will not be recognized as 
multi-feed. 

 
 
Note:  
1.

 

You can clear the previous multi-feed conditions by 

clicking the Reset button. 

2.

 

The scanner can memorize to bypass up to 25 multi-feed 

conditions. 

3.

 

If you uninstall your scanner driver, the previous 

multi-feed conditions which have been set to memorize 
and skip will still be valid. 

 
 

3-41 

Summary of Contents for BS-1005S

































































































Reviews:

No comments