Avision 300500001, User Manual

Page: 83 / 88

7-2
Question: More than one sheet of paper were fed into
the scanner.
Answer: a) Open ADF unit.
b) Remove the multi-fed sheets of paper.
c) Close the ADF unit.
d) Flatten the corners and edges; loosen the
paper before reloading it in the paper
guide.
e)
Check the feeding roller condition and
do the cleaning if necessary.
Question: Paper becomes skewed in the scanner.
Answer: a) Check the feeding roller condition; do the
cleaning if necessary.
b) Use the paper guide when feeding the
paper.
Question: When I power on the scanner, it makes
noises and will not stand ready.
Answer: There are two possibilities:
a) You forgot to remove the shipping switch
from the scanner. Please remove the
shipping retainer first.
b) You did not place the scanner on a flat
desktop surface. This may cause the
scanner to function improperly.