11.3. I
NITIAL
S
ET
-U
P
After starting the companion software, the virtual COM port number needs to be entered. You can
find this number in the Windows “Device Manager”.
This setting is stored for future use.
Click on ‘open COM port’ – which will turn green if successful. You can use the “check” button to
verify that the connection is alive.
You can use the “Check” button to verify the connection to the Avisaro Device. It should light up
green when clicked.
The baudrate setting for “if connected through real RS22.. “ can be ignored. This setting is used only
in special projects and not scope of this document.
All settings are deactivated if there is no Avisaro Device attached.
11.4. U
SING THE
PC C
OMPANION
T
OOL
Click on “Write Config” to transmit changes in the PC tool to the Avisaro device. Click on “Read
Config” to display the currently stored values (if you navigate between options, the latest settings are
read of course automatically).
Most settings become active after reboot. This can be done in Commands
⇨
Device Control: Reboot
Device
Page: 11
Version 2021-05-06
Summary of Contents for C42077
Page 15: ...Page 15 Version 2021 05 06...
