Configuration
Avira GmbH
Avira AntiVir MailGate
40
Bounce
MessageUser
Recipient for email failure
(not in milter mode):
This is the user that receives email failure reports when an email cannot be sent by
MTA.
BounceMessageUser MAILER-DAEMON
Bounce
Message
SizeBody
Size of the email failure - mail body
(not in milter mode):
Sets the size in bytes from the original mail body, to be returned by bounce mail.
The value 0 means no limit is set.
e.g.: 4KB, 3MB, 2GB.
BounceMessageSizeBody 0
Bounce
Message
SizeHeader
Size of the email failure - mail header
(not in milter mode):
Sets the size in bytes from the original mail header, to be returned by bounce mail.
The value 0 means no limit is set.
e.g.: 2KB (2 Kilobytes), 3MB (3 Megabytes), 2GB (2 Gigabytes).
BounceMessageSizeHeader 0
AddXHeader
Adding X header
(not in milter mode):
If the setting is YES, the queue ID and information on scan status will be included
in the header of the email. For example:
X-AntiVirus: checked by AntiVir
MailGate...
The text cannot be modified.
AddXHeader YES
AddReceived
ByHeader
Adding "Received:" stamp to header
(not in milter mode):
If the setting is YES, the scanned email contains a note on incoming time.
AddReceivedByHeader YES
MaxHop
Count
Avoiding mail loops
(not in milter mode):
If more "Received:" lines appear in the header, the email is blocked.
MaxHopCount 100
ScanTimeout
Maximum time for email scanning
:
Defines maximum time for email scanning, in seconds:
ScanTimeout 300
External
Program
Running an external program or script when a virus/unwanted program is
detected:
Calls an external program or script in case of detection. The parameter is the ID of
the rejected email (see
MailGate Spool Directories
– Page 27).
ExternalProgram /path/to/program
