【
FAR
】
Focus out: manually focus out to make near distance objects clearer.
【
TELE
】
Narrow-angle button/ Zoom-in: reduce the field of view, zoom in to the target object.
【
WIDE
】
Wide-angle button/ Zoom out: expand the field of view, zoom out from the target object.
【
OPEN
】
Ap: Increase aperture. When the aperture is at its maximum, the image will display in
full white. When the LCD shows the camera menu, press
【
OPEN
】
will enter the selected submenu.
【
CLOSE
】
Aperture -: Reduce aperture. When the aperture is at its minimum, the image will display in full
black. When the LCD shows the camera menu, press
【
CLOSE
】
will go back to the previous menu.
【
CAM
】
Select the address of a target device (decoder or camera). Use with key combination number keys
【
0~255
】
+
【
ENTER
】
.
【
SET ID
】
Set ID: press and hold the button for 3sec to set the cascading camera protocol address.
4.2 LCD screen display
All operations will be displayed on the LCD screen. If there is no operation or movement for 30 sec, the
controller will enter the power saving mode (with the lowest backlight), with the current status displayed.
4.3 Joystick control
5.
Keyboard Setups
5.1 PTZ setup
An example is used for instructions below:
- Camera Address (Camera ID): 28
- Protocol used: Pelco-P
- Baud rate: 9600 bps
7
