11
3. Application Instruction
3.1 Video Output
3.1.1 Power-On Initialization Configuration
Upon connecting to the power, camera will enter initialization configuration. IR indicator light will be flashing.
When the camera returns to the HOME position (center position for P/T), and lens finish zooming in/out, the
auto-testing is complete. IR indicator light will also stop flashing. If the preset 0 is set, camera will rotate to the
preset position (No. 0) after initialization.
3.1.2 Video output
Connect the video output cable: the user can select output mode accordingly.
1)
Network output: connect AV-1362U to a computer via Ethernet cable. Open the browser, and enter the
camera IP address (factory default 192.168.5.163) in the address bar. On the login page, input user name
and password (factory defaults are “admin”). It will enter the preview page, and the captured image will
show.
Note: If the user forgets your user name, password, or IP address, he can manually restore the default using the
remote-control key combination * #.
2)
DVI(HDMI) output: connect the monitor with the corresponding video output port, the image will show on
the monitor.
3)
USB3.0 output: connect the monitor with the corresponding video output port to your PC, use the software
that recognizes a webcam, choose the right device: Cyt-FX4 for USB3.0; FHD Camera for USD2.0.
