Avipas AV-1280, User Manual

Page: 37 / 48

37

Unable to access IP Camera by IE browser.
1. Access network with PC, check if network works. In this way, the user can get rid of any cable
failure or network failure.
2. Disconnect IP Camera from network. Connect IP Camera to PC, and re-set the IP address
following the proper operations.
3. Check the server's IP address, subnet mask and gateway address.
4. Check if MAC addresses conflict.
5. Check if web port is occupied by other devices.

When modifying the IP address incorrectly (causing the wrong IP address), or if the web
password is forgotten, press "[*]+[
＃
]+[Manual]" on the IR remote control to restore the default settings
(Default IP: 192.168.5.163; Default username: admin; Default password: admin).
Sound

No sound
1. Check the audio connection to the host PC.
2. Check IP Camera audio parameter settings, and check if intercepting function is on.
Control

IR remote control cannot control the camera
1. Change the battery
2. Check if the camera is in working mode.
3. Check if IR address of the remote control is the same as that of the camera.

Serial communication cannot control the camera
1. Check if the camera is in working mode.
2. Check if the control cable is connected correctly.