Custom Setup (Advance Users)
1.) Highlight the device on the local devices section and on the right side of IPEdit all network
information on the device will be displayed.
If the device is not on the same network a Red Exclamation mark
will appear in the IP
Network information section
2.) To setup the device, you will need type in the correct
Gateway
and
IP Address
.
The Gateway Address:
The gateway address can be obtained in Windows under the network
connections page
IP Address
: Make sure the first 3 sections of the IP Address matches the gateway address.
Example: Gateway Address – 192.168.1.1 IP Address – 192.168.1.xxx
3.) Once the Default Gateway information has been obtained, enter the correct information
into IPEdit and hit the submit button.
-
14-
Ref#90020326K0709
