37
AN-16/
i
-M M
ic
i
Nput
M
odule
u
ser
G
uide
AN-16/i-M
AN-16/i-M
AN-16/i-M
AN-16/o
AN-16/o
AN-16/o
AN-16/o
AN-16/i-M
A-Net Out
A-Net In
A
B
C
D
A
B
C
D
Bridge
System Bridge
System Bridge
Ports A, B, and C use the same type of module.
AN-16/o
AN-16/i-M
AN-16/i-M
AN-16/i-M
AN-16/i-M
AN-16/o
AN-16/o
AN-16/o
A-Net Out
A-Net In
A
B
C
D
A
B
C
D
Bridge
System Bridge
System Bridge
Ports B, C, and D use the same type of module.
For a 32 x 32 configuration, place two similar modules together, connected to
ports B, and C on the System Bridge. The modules connected to ports A and
D are also similar by doing this configuration. See the following diagram.
AN-16/o
AN-16/i-M
AN-16/i-M
AN-16/o
AN-16/i-M
AN-16/o
AN-16/o
AN-16/i-M
A-Net Out
A-Net In
A
B
C
D
A
B
C
D
Bridge
System Bridge
System Bridge
Ports A, and D use the same type of module; ports B and C contain the same type
of module.
The total A‑Net cable length between devices is limited to 500 feet.
Expanding a Network
As mentioned in the section on 32‑channel systems, any available A‑Net
Out jack on an A‑Net device can be used to expand an existing system. Any
number of additional AN‑16/o Output Modules can be added, as can any
number of A‑16II or A‑16R Personal Mixers. A‑Net Distributors (the A‑16D and
