20
Remote Control Operation
Matching the code
control board, then use a clip or toothpick to press the code buttons at
the motor control board and on the remote-control at least 5 seconds at
the same time, you will see the LED indicator on the remote control blink-
ing, when it stops blinking and turns to light on status, it matches suc-
cessfully, you can release the button now.
If it keeps blinking over 10 seconds, the match fails and the LED indicator
will be off. The reason may be that the time you press the button is less
than 5 seconds, or you didn’t press the two buttons at the same time.
To match the code again, please release the code buttons and repeat
above steps.
Sleep mode
If you don’t operate the car in 8 hours after you turn on the power switch,
the car will shift to sleep mode automatically. If you want to use the unit,
please turn the power switch off and restart it to activate.
Coding switch
Coding switch
