4. Lift the handles on either side of the hard drive tray.
5. Press the orange release tab on the hard drive tray then lift up the hard drive carrier handle to release the
hard drive.
6. Hold the handle and lift the hard drive out of the tray.
7. While holding the handle, pull the edges of the carrier away from the hard drive to remove the failed hard
drive from the carrier.
8. Align the slots on the new hard drive to the tabs on the hard drive carrier.
9. Pull the edges of the carrier over the slots on the hard drive.
10. Place the new hard drive into the tray and push the handle down until the hard drive clicks into place.
11. Fold down the handles on the hard drive tray.
12. Close and lock the recorder cover.
13. Reconnect all the cables to the recorder.
14. Power the recorder.
After the operating system starts up, the recorder immediately starts rebuilding the hard drive. The progress is
displayed in the Server Administrator. This may take several hours.
Replacing Center Hard Drives
22
