11. Insert the USB flash drive provided with the GPU.
12. From the USB flash drive, locate the folder for your operating system.
l
HD-NVR3-PRM —
../WinServ2012/
l
HD-NVR3-STD —
../Win7/
13. Right-click
...-whql.exe
and select
Run as administrator
.
Allow the installer to run and finish.
14. Right-click
GPU Configuration Tool.exe
and select
Run as administrator
.
Allow the installer to run and finish.
After the GPU has been installed, you can download, install and run the latest version of the Avigilon Control
Center software.
Installing GPU into HD-NVR2
1. Make sure the recorder is turned off.
l
All network, power and peripheral cables are disconnected from the recorder.
l
It is recommended that you use a static mat or static strap to ground yourself against static shock.
2. At the top of the recorder, unlock the latch release then lift and rotate the latch towards the back of the
recorder.
The cover slides back and is released from the recorder body.
Installing GPU into HD-NVR2
4
