Preparing the Installation
Required Tools and Materials
The following tools are required to complete the installation but are not included in the package:
l
No. 2 Phillips screwdriver — for attaching camera to a mounting surface.
Pre-Deployment In-Box Configuration
The camera comes equipped with an RJ45 connector that is accessible from the outside of the box for users
that want to configure camera settings before installing the camera. The RJ45 connector is accessible
through the small flap on the side of the camera box for easy configuration before unpacking the camera.
Note:
The maximum recommended duration of in-box configuration is 1 hour. The maximum
recommended ambient temperature is 30° C (86° F).
1. Locate and open the flap on the side of the camera packaging. Look for the
Config
label.
2. Connect a network cable to the RJ45 plug on the configuration cable. The network cable must provide
PoE. IEEE 802.3af Class 3, to power the camera during configuration.
3. Connect to the camera using an ACC Client, the Camera Configuration Tool, or the camera's web
browser interface to configure the camera's settings. For more information about connecting to the
camera, see
, and
Accessing the Live Video Stream
4. Once you have finished making configuration changes, unplug the network cable.
CAUTION —
Be careful when handling the camera after configuring it inside the packaging. The
camera may be hot when handling it or removing from the packaging immediately after in-box
configuration.
Preparing the Installation
14
