o
Power over Ethernet (PoE) Class 3 — If PoE is available, the LEDs will turn on.
o
External Power — Connect an external 12 V DC or 24 V AC power source to the power connector
block.
6. Check that the Connection Status LED indicates the correct state. For more information, see
LED
Indicators
on page 19.
(Optional) Using the USB Wifi Adapter
If you have a USB Wifi Adapter (H4-AC-WIFI), attach it to the camera's micro USB port to access the camera's
mobile web interface.
After you connect to the wifi signal broadcast by the adapter, you can access the mobile web interface from any
mobile device using the following address:
http://camera.lan
For more information about configuring the camera from the mobile web interface see
Avigilon USB Wifi Adapter
System User Guide
.
NOTE:
The camera will reserve the 10.11.22.32/28 subnet for internal use while the USB Wifi Adapter is plugged in.
Assigning an IP Address
The camera automatically obtains an IP address when it is connected to a network.
NOTE:
If the camera cannot obtain an IP address from a DHCP server, it will use Zero Configuration Networking
(Zeroconf) to choose an IP address. When set using Zeroconf, the IP address is in the 169.254.0.0/16 subnet.
The IP address settings can be changed using one of the following methods:
l
The mobile web interface using the USB Wifi Adapter. For more information, see
(Optional) Using the USB
Wifi Adapter
above.
l
Camera's web browser interface: http://
<camera IP address>
/
l
Network Video Management software application (for example, Avigilon Control Center™).
l
ARP/Ping method. For more information, see
Setting the IP Address Using the ARP/Ping Method
on
page 21.
NOTE:
The default camera username is
administrator
with no password.
Accessing the Live Video Stream
Live video stream can be viewed using one of the following methods:
l
The mobile web interface using the USB Wifi Adapter. For more information, see
(Optional) Using the USB
Wifi Adapter
above.
l
Web browser interface: http://
< camera IP address>
/
l
Network Video Management software application (for example, the Avigilon Control Center software).
NOTE:
The default camera username is
administrator
with no password.
Aiming the Dome Camera
Reference the camera's live stream as you aim the camera.
12
(Optional) Using the USB Wifi Adapter
