Avigilon H.264 Series, User Manual, Page: 8 / 138

4
English
Setup
NOTE: Some or all Setup pages may not be displayed if you do not
have the required user permissions.
The Avigilon camera’s default settings allow you to use the camera
immediately after installation. If you have special requirements, you
can customize the camera settings through the camera web
interface.
A Restore Default button is available on each Setup page to allow
you to restore the camera back to its original settings.
Be aware that some of the settings are only available through the
camera web interface and can not be changed in the network video
management software.
General
When you select the Setup link, the first page you see is the
General page. The General page allows you to set the camera’s
identity.
1. In the Name field, give the camera a meaningful name to
help you identify the camera.
2. In the Location field, describe the camera’s location.
3. Select the Disable camera status LEDs check box to
disable the LEDs located on the back of the camera.
4. Click Apply .