Introduction
Avigilon provides an optional AI NVR Performance Upgrade Kit for the AI NVR Standard. This kit increases
the analytic capacity of the AI NVR allowing it to run more concurrent analytics. See the
for more details.
Important:
An AI NVR Standard with the:
l
Performance Upgrade Kit installed is supported on
l
Performance Upgrade Kit and the 10GbE Kit installed is supported on
.
Your organization must upgrade to a release of the ACC software that supports the upgraded
AI NVR Standard if it is using an earlier release of the software.
Part Number
Description
AINVR-STD-PRK
AI NVR Standard Performance Upgrade Kit
Note:
If the AI NVR is an operating part of your security system, be aware that it must be shut down
to complete this procedure.
Important:
If you are installing both the AI NVR Standard 10GbE Kit (AINVR-STD-10GBE) and the
AI NVR Performance Upgrade Kit (AINVR-STD-PRK) in the AI NVR, it is recommended that you install
the components from both kits as follows:
1. Install CPU and RAM from the AI NVR Performance Kit using the instructions up to the section
“2. Removing the Original GPU Card” in the
AI NVR Standard Performance Kit Installation
Guide
.
2. Install the second GPU card using the instructions in the section “Installing the 10GbECard in
Slot 3 of Expansion Riser 1” of the
AI NVR Standard 10GbE Kit Installation Guide
, which
includes instructions to install the GPU card provided in AI NVR Performance Upgrade Kit.
Introduction
4
