9. Use the camera mounting screws to fasten the camera to the bracket.
Removing the Configuration Panel Cover
1. Use a T20 Pin-In Torx driver to unscrew the configuration panel cover.
2. Remove the cover from the configuration panel.
(Optional) Using the USB Wi-Fi Adapter
If you have a USB Wi-Fi Adapter (H4-AC-WIFI), attach it to the camera's micro USB port to access the camera's
mobile web interface.
After you connect to the Wi-Fi signal broadcast by the adapter, you can access the mobile web interface from
any mobile device using the following address:
http://camera.lan
For more information about configuring the camera from the mobile web interface see
Avigilon USB Wi-Fi
Adapter System User Guide
.
NOTE:
The camera will reserve the 10.11.22.32/28 subnet for internal use while the USB Wi-Fi Adapter is plugged in.
Removing the Configuration Panel Cover
10
