Avidyne IFD410 FMS/GPS, Pilot'S Manual

Page: 102 / 380

IFD400 Series Pilot Guide
2-46 FMS Subsystem
CREATING A NEW ROUTE
A new route can be created via the ROUTE tab by moving the
cursor to the "New Route" row and then pressing the right inner
knob button or touching the row again.
At that point, an empty flight plan will be shown and the route
name field will be highlighted. Entering a route name is optional
(see "Naming A Route" on page 2-46). To continue without
entering a name, turn the right outer knob to show the familiar
insert cursor.
Use the same methods as described on the FPL page to edit the
stored route. When editing is complete, press the "Back To
Route List" LSK.
EDITING A ROUTE
To start editing an existing stored route, move the cursor to
surround the route to be edited. Then initiate editing by pressing
the right knob button or touching the row again.
At that point, the route to be edited will appear. Except for an
additional row containing the route name at the top of the screen,
the route will appear in the familiar format used on the FPL page.
Use the same methods as described on the FPL page to edit the
stored route. When editing is complete, press the "Back To
Route List" LSK.
NAMING A ROUTE
A row containing the route name will be shown above the legs of
the route. The route name field in this row can be populated by
the system or manually entered. If not manually entered, the
system will name a route using the identifiers of the first and last
legs in the route (generally the origin and destination).
To manually set the route name, move the cursor to the route
name field and then press the right knob button or touch the field.
Either use the keyboard or turn the right outer and inner knobs to
enter the na
me. When complete, press the “Enter” button on the
keyboard or press the right knob button to accept the new route
name.