600-00081-000 Rev 07
-29-
FlightMax
Entegra
PFD
Missed Approach
Prior to missed approach, disconnect the autopilot, ensure the aircraft
is trimmed for the power setting, establish a climb attitude and use
Entegras
Alt Bug to set the desired missed altitude. On the climbout,
select HDG or NAV (depending on missed approach instructions) on
the autopilot, press ALT and VS simultaneously on the autopilot, and
press OBS on the navigator to continue the coupled missed
approach.
Missed Approach
Users Guide
CAUTION: If an altitude capture is attempted to a target altitude
above current aircraft altitude and a negative value has been set
in the VSI Bug, the system will not proceed with the altitude
capture but will transition into altitude hold mode instead. The
same is true for target altitudes below current aircraft altitude
but positive values set in the VSI Bug.
When equipped with both a GPS/VHF navigator and Stec System
55X system:
