EN
21
Date et heure (Date and time):
Setting the date
and time displayed on the central unit. Note: if
the central unit is connected to the Internet, it will
automatically update the date and time via the
Internet.
Format date (Date format):
Format of date and
time displayed on the screen.
Délai ent/sortie (Entry/exit delay):
When you
set one of your detectors to "
Entry Zone
" mode
(see Wireless Detector Pairing above), it does
not immediately sound the alarm and leaves you
a delay to disarm the system after entering your
home. This menu is used to adjust the duration of
the delay. Two different durations are adjustable
from 0 to 300 seconds:
• Entry delay: this is the period you have to
disarm the system after entering your home
(and triggering the detector on the front door).
• Exit delay: this is the period you have to leave
your home after arming your alarm. Any alert
triggered by a detector set to "
Entry Zone
"
during this time will be ignored.
Contrôle par tel (Control by phone):
Arm or
disarm the system via voice call (provided that the
phone number is authorised in the
"No téléphone"
(Phone No.)
menu). If you disable this option,
stored phone numbers will not be able to arm or
disarm the system, but will still receive alert calls if
a detector triggered.
Son Arm/Desarm
(Arm/disarm
sound):
Confirmation beep when arming or disarming the
central unit.
AI. Echec GSM (GSM failure alert):
Define what
the central unit does if it loses access to the mobile
network while armed: send the alert (ON) or ignore
(OFF).
Son touches (Button sounds):
Enable/disable
beeps when dialling from the keyboard.
Codes accès (Access code):
Used to set the
alarm's various secret codes.
• Admin code: this code gives access to all
central unit settings. Enter this code and then
press the
Enter
button to access the central unit's
settings. Default code: 123456
• User code: this code allows the central unit to
be disarmed using the keypad. Enter this code
and then press the button to disarm the
central unit. Default code: 1234
• Duress code: this code has the same effect as
the disarm code except that it triggers an alert
via SMS, phone and WiFi. This code allows
you to trigger a silent alert while disarming the
system in the event you are forced to disarm it.
Default code: 8888
• Opening code: not used on this model
• For better security, please change your central
unit's secret codes from the default codes.
Tonalités (Tones):
When you have activated
control by phone and have inserted a compatible
SIM card into the central unit, you can control the
central unit by calling its number using a touch-tone
phone. This setting indicates how many rings the
central unit will wait before picking up and waiting
for your commands.
Durée sirène (Siren duration):
Used to define the
duration of the built-in siren during a triggered alert
(1 to 9 minutes).
Rétroéclairage (Backlighting):
Used to activate
or deactivate the backlighting of the central unit's
screen.
Paramètres sirène (Siren settings):
Used to
activate or deactivate the central unit's built-in siren
and the paired wireless sirens (not included).
Envoi SMS Arm (Send SMS when armed):
Used
to activate or deactivate SMS notifications when
the central unit is armed.
Envoi SMS Désarm (Send SMS when disarmed):
Used to activate or deactivate SMS notifications
when the central unit is disarmed.
Répétition appel (Repeated calls):
When an alert
is triggered, the central unit will try to call all the
stored telephone numbers (up to 5) one after the
other. If none of the numbers answer the call, this
setting is used to select how many times the calls
will be repeated (number 1, then 2, 3, 4, 5, second
attempt to call 1, then 2, 3...).
A propos (About):
Internal firmware version of the
central unit.
Langue (Language):
Used to set the display
language
Reset:
Reset all settings to 0 and return to factory
settings.
D - CONFIGURATION
