Avidsen 123288, Instructions Manual

Page: 36 / 160

EN
16
1 - TECHNICAL CHARACTERISTICS
Camera
Power supply
5VDC / 1A
Wireless network interface
IEEE 802.11 b/g/n using 2.4 GHz (HT20) WiFi
Optical sensor
¼’’ CMOS
Minimum luminous intensity
0 lux
Night vision
Automatic (dusk-to-dawn sensor)
Range: 10m
Lens
f: 3.6 mm
Buttons
Reset button: restores factory settings
Video compression
H.264
Resolution
Primary stream: up to 1280x720 pixels
Secondary stream: up to 640x352 pixels
Audio
Built-in microphone and loudspeaker for two-way audio
communication
Storage
1 microSD card slot up to 128 GB memory for storing video via
remote access
Operating temperature and humidity
0°C to 40°C, 20% to 85% RH, non-condensing
For indoor use only
Storage temperature and humidity
-10°C to 60°C, 0% to 90% RH, non-condensing
G - TEChNiCAL ANd LEGAL iNFOrmATiON
720P WiFi iP camera
2 - WARRANTY
• This product is under warranty for parts and
labour for 2 years from the date of purchase.
Proof of purchase must be retained for the
duration of the warranty period.
• The warranty does not cover damage caused
by negligence, knocks or accidents.
• Should not be opened or repaired by
someone other than an AVIDSEN employee.
• The warranty will be void if the device is
tampered with.
3 - HELP AND ADVICE
• If, in spite of the care we have taken in
designing our products and drafting these
instructions, you do encounter difficulties
when installing your product or you have any
questions, we urge you to contact one of our
specialists who will be glad to help.
• If you encounter operating problems during
the installation or a few days afterwards,
it is essential that you are in front of your
installation when contacting us, so that one
of our technicians can diagnose the source of
the problem, as it will probably be the result of
a setting that is incorrect or an installation that
is not to specification.