manualshive.com logo in svg

Avid Technology MEDIAswitch, Manual, Page: 18 / 34

Share
Download
Avid Technology MEDIAswitch Manual Download Page 18

18

Verify that the Remote Access Service, Dial-Up Adapter, and the TCP/IP Protocol are installed.

Step 

 

Action

1

Double click on Control Panel 

à

Network icons to display the Network window.

2

Click the “Services” tab.

Verify that the Remote Access Service is listed in the Network Services box and select it.

Click 

PROPERTIES

.

3

The 

Remote Access Setup 

window displays. Verify that the Standard 19200 bps Modem

exists and that it is configured correctly by selecting the modem.

Click 

CONFIGURE

. The modem should be configured for Dial Out only.

Click 

NETWORK

. The modem should be configured for TCP/IP.

Click 

CONTINUE

.

4

Click the “Bindings” tab.

Click on the “Remote Access Server Service” and click on the 

+ 

sign.

Verify that the WINS Client (TCP/IP) is displayed.

Click on the 

+ 

sign next to WINS Client. Verify that the Remote Access WAN Wrapper is

displayed.

Click 

CLOSE

. Now Windows computes the bindings between protocol layers.

5

Close any open windows.

Restart the host computer.

Next, to complete the process, connect the Windows NT workstation or server you just connected
to the Avid MEDIAswitch using the serial cable that was enclosed.

Windows NT 4.0 SLIP Connection

The following steps will connect the Windows NT 4.0 PC to the Avid MEDIAswitch with the SLIP
protocol.

1.  Double-click on My Computer

à

Dial-Up Networking. The 

Dial-Up Networking 

window

displays.

2.  Select the  MEDIAswitch phonebook entry in the “Phonebook entry to dial:” field and click

DIAL

.

3.  The 

Connect to MEDIAswitch 

window displays. (

Note: 

Do not add a password.) Click 

OK

.

4.  The 

Connection Complete 

window displays. Click 

OK

.

Summary of Contents for MEDIAswitch



































Reviews:

No comments