Installing the MEDIArray ZX4 Hardware
25
Looping Two MEDIArray ZX4s to Two MEDIASwitch 16-4G
You can also connect two MEDIArray ZX4 enclosures, each containing two
Fibre Channel boards, to two MEDIASwitch 16-4G. The connections from the
Fibre Channel boards to the MEDIASwitch 16-4G use the same cable
connections explained in
“Looping Two MEDIArray ZX4s to One
MEDIASwitch 16-4Gb” on page 24
, only it uses two Fibre Channel boards.
The following figure displays the connections using a larger view of the Fibre
Channel boards in each MEDIArray ZX4 and two MEDIASwitch 16-4G than
shown in the previous figures. This allows a better view of the connections.
See
“Configuring Considerations for MEDIArray ZX4” on page 22
for the
maximum number of MEDIArray ZX4s per Unity system.
Looping Two MEDIArray ZX4s to a MEDIASwitch 16-4Gb
T
R
T
R
T
R
Detailed Connections
MEDIArray ZX41
MEDIArray ZX42
for each Fibre Channel board
MEDIASwitch 16-4Gb 1
MEDIASwitch 16-4Gb 2
