Checklist: Installing the AirSpeed Video Server
60
Checklist: Installing the AirSpeed Video Server
Ensuring integration with video devices, such as the AirSpeed 5000 or AirSpeed Multi Stream,
requires installation of various components and services, as well as some configuration. The
following is a checklist of activities an installer should verify to ensure a successful installation.
Complete the following tasks in the order that they are listed. If you are viewing this checklist online,
you can easily access a linked topic that provides procedural details for the task. Return to this main
checklist after you have completed each task.
After installation, some configuration is required. For more information, see
the AirSpeed Video Server” on page 65
n
Regardless of whether the AirSpeed video server is a capture and/or playback server, ensure it is in
the MediaCentral workgroup. If it is a playback server that will be controlled by MediaCentral
Command, it must be configured to join a second workgroup—the same workgroup as the Command
servers.
Tasks
Refer to...
b
Rack, cable, and connect the AirSpeed video
server to the network.
The documentation that came with your Avid
AirSpeed video server for more information.
b
Install the core components of Avid Service
Framework on the video server.
“Installing Avid Service Framework” on page 61
b
Install the AirSpeed software.
The documentation that came with your Avid
AirSpeed Multi Stream or AirSpeed 5000 for
more information.
b
Install the AirSpeed Multi Stream device service
from the MediaCentral Command software
installation CD. Both AirSpeed video servers, the
5000 and Multi Stream, use the AMS device
service.
“Installing AirSpeed Multi Stream Device
Services” on page 63
Summary of Contents for MediaCentral Command
Page 1: ...MediaCentral Command Installation and Configuration Guide...
Page 192: ...Index 192...
Page 193: ......
