Avid Technology MC Transport, User Manual

Page: 30 / 43

MC Transport User Guide 26
Assignable Knobs
In some applications, the Jog Wheel can control knobs and sliders. Some applications require clicking on the control while others
allow the cursor to hover over it.
To control knobs and sliders with the Jog wheel:
1
Select
Soft Keys
from the Section pop-up. The Soft Keys tab opens.
2
Double-click the Jog Soft Key. The Soft Key Command Editor opens.
3
Select Jog from the Wheel pop-up menu. Make sure to select MC Transport Jog (top) and not the MC Control’s (bottom). Their
icons are beside each to make this clear.
4
Select Assignable Knob from the Function pop-up menu. The following figure shows the Function menu after selecting the As-
signable Knob Wheel Command.
5
Close the Soft Key Command Editor.
6
Press the Jog Soft Key to use the Assignable Knob function with the Jog Wheel.
Soft Keys tab
Soft Key Command Editor configured for Assignable Knob