Connecting ISIS Hardware
70
If your network has a network time protocol (NTP) server, you can enter the IP address
of that server in the Chassis Configuration window. NTP Server 1 is for the primary
NTP server and if you have a secondary NTP server, enter the secondary IP address in
NTP Server 2.
n
Once the NTP is configured on a switch, the information propagates to all the other switches
automatically. The time is also automatically synchronized onto the storage blades after the NTP
is configured on the switch.
8. Click Submit.
A Dialog box might appear with an informational warning and can be disregarded. The first
engine is now properly addressed.
Two-Engine Stacking
To stack two engines:
1. Complete the procedure
“Setting-Up Network Addresses In the Stack” on page 68
.
2. Open a left-side Switch Web page.
3. Go to System > Configuration > Add/Remove chassis.