Rack-Mounting the Equipment
59
Front Panel Screws
Mounting the Engine
w
Lifting the engine with the blades and power supplies installed can cause an injury. The
engine must have the blades and power supplies removed prior to lifting. Avid recommends
that two people be used whenever lifting the empty engine.
To mount the engine into the rack:
1. Screw the brackets to the rear of the rack as shown in the following figure.
2. Make sure that the blades and power supplies are not in the engine.
3. Using two people, lift the engine and place the rear of the engine onto the brackets as shown
in the following figure.
Rack enclosure
front mounting rail
Rear
