Stopping and Restarting the System Directors
134
Stopping and Restarting the System Directors
In a ISIS 7500 | 7000 failover configuration, you can stop the Active System Director and watch
the Standby System Director become the Active System Director. When you restart the System
Director that was previously Active, that System Director now becomes the Standby System
Director. If you stop and restart the Standby System Director it remains the Standby System
Director. The following procedures describes how you to stop and start the System Directors.
n
If you have a failed System Director, stop and restart that System Director. Very often a single
stop and start of the System Director corrects the problem.
To stop and start the System Director using the Launch Pad:
1. If the ISIS Launch Pad is not displayed on the Avid ISIS System Director Desktop, click the
ISIS Launch Pad icon in the Taskbar’s System Tray to display or hide the Launch Pad.
n
You can also open other ISIS tools by clicking the icons in the Launch Pad.
The ISIS Launch Pad is displayed.
2. Start or stop the System Director by clicking one of the following icons in the ISIS Launch
Pad.
