Avid Technology EXPANSION CHASSIS, Instructions For Installing And Using, Page: 95 / 98

Appendix B
Replacing Fuses
The Expansion Chassis has two fuses. They are in a fuse holder that is part of the
AC power input (see Figure 56). The fuses protect both the line and neutral sides
of the AC power entering the chassis. This appendix describes how to replace the
fuses and give the specifications for the replacement fuses.
Figure 56: Fuse location
Replacing a Fuse
To replace the line fuse:
1. Turn off the power to the Expansion Chassis.
2. Remove the AC power cord from the AC power input.
3. Open the fuse access cover by pulling down on the access cover tab (see
Figure 57).
AC power
input
Fuse holder