Cabling Up the AirSpeed Multi Stream
65
Connecting USB Devices (Mouse and Keyboard)
You need to provide a standard USB compatible keyboard and mouse. The keyboard and
mouse plug directly into either of the USB ports on the rear of the chassis. Or, if you have a
splitter, you can connect both to one USB connecter and leave the other USB connector open
for other purposes (such as a removable USB hard drive).
n
Some USB flash devices might not appear in a Safely Remove Hardware dialog box even
though they are plugged in. In addition, it might take several seconds for a USB device to be
available to the system.
To connect the keyboard and mouse cables:
1. Connect a USB compatible mouse to one of the USB connectors on the rear of the
AirSpeed Multi Stream.
2. Connect the USB compatible keyboard to the other USB connector on the rear of the
AirSpeed Multi Stream.
USB
ETHERNET
1
2
3
4
USB mouse
connection
USB keyboard
connection
USB
ETHERNET
1
2
3
4
USB mouse
connection
USB keyboard
connection
Summary of Contents for AirSpeed series
