Avid Technology AirSpeed Multi Stream, Installation And User Manual

Page: 136 / 398

4
Configuring the Software in a Workgroup Environment
136
11. Determine whether your site is using Avid iNEWS Command, CaptureManager, or
Interplay Capture for capture or playout. If your site is:
t
Using Avid iNEWS Command, Avid CaptureManager, or Avid Interplay Capture to
control AirSpeed Multi Stream channels for capture or Playout, you must install the
AirSpeed Multi Stream Device Service. For more information, see
“(Option)
Installing the AirSpeed Multi Stream Device Service” on page 101 .
t
Not using Avid iNEWS Command, Avid CaptureManager, or Avid Interplay
Capture to control AirSpeed Multi Stream channels for Playout, you are ready to
configure your AirSpeed Multi Stream. For more information, see
“Creating a New
Database in the AirSpeed Multi Stream Application” on page 102 .
After you have configured the there are no specific changes you need to make to the
Avid Service Framework for AirSpeed Multi Stream, if you want more information on
configuring the Avid Service Framework settings, see “Configuring Workstation
Settings” in the
Avid Service Framework User’s Guide .
Configuring the Avid Service Configuration for Interplay Workgroup
This topic describes how to configure the Avid Service Configuration for Interplay
Workgroup, including creating Record and Destination templates.
Before you configure the Avid Service Configuration, you must create a user with an
AirSpeed Multi Stream user name with matching passwords (recommended Avid1234) in
both Interplay and Unity. For more information, see the
Avid Interplay Engine and Avid
Interplay Archive Manager Administration Guide .
There are five stages to configure the Avid Service Configuration for Interplay Workgroup.
They are listed in the checklist below and each is described in detail following the checklist:
‰
Configure the Avid Service Configuration. See
“Configuring the Avid Service
Configuration” on page 137
.
‰
Set up your credentials for Interplay and ISIS or Unity. See “Setting Up your Credentials
for Connection to Interplay” on page 138 .
‰
Set up Record and Destination templates. See “Setting Up Record and Destination
Templates” on page 140 .
‰
Select Default templates. See “Selecting Default Templates” on page 144 .
‰
Set up Inventory rules. See “Setting Up Inventory Rules” on page 146 .